64 Cubis
®
MCE Operating Instructions
Accessories
16 Accessories
16.1 Accessories
This table contains an excerpt of the accessories that can be ordered. For information
on other products, contact Sartorius.
16.1.1 Printers and Communication
Item Quantity Order number
Thermal transfer | thermal printer for GLP / GMP
printouts on continuous paper and labels
1 YDP30
Standard paper and ink ribbon, set, 90 m, for YDP30 1 69Y03285
Self-adhesive paper and ink ribbon, 90 m, for YDP30 1 69Y03286
Standard thermal paper, 24 m roll, for YDP30 | YDP40 5 69Y03287
Self-adhesive thermal paper, 13 m roll, for YDP30 5 69Y03288
Self-adhesive labels for YDP30
58 mm x 100 mm 350 69Y03094
58 mm x 76 mm 500 69Y03093
58 mm x 30 mm 1000 69Y03092
Display cable, 3 m, for separate installation of
display and weighing units, installation by Sartorius
Service or at the factory (order code VF4016)
1 On request
Installation of display cable, 3 m, for separate
installation of display and weighing units
1 VF4016
Cable, 3 m, between the weighing module and
electronics module for semi-microbalance
1 YCC01-MSM3
RS232C connection cable, 9-pin, 3 m, for connection
to a PC with 9-pin COM port
1 On request
Sartorius Wedge, software for data communication
between the PC and balance
1 YSW02
16.1.2 Displays and Input / Output Elements
Item Quantity Order number
Display and control unit with color TFT graphic
display and touch screen
1 YAC01MCA
Motion sensor for triggering a maximum of
4 functions via gesture control, selection via menu
1 YHS02MS
To Next Page
Loading...
Need help?
General