Sartorius Cubis MCE Series User Manual

Cubis
®
MCE Operating Instructions 3
Contents
Contents
1 About these Instructions............................ 5
1.1 Scope ....................................... 5
1.2 Symbols Used................................. 5
1.2.1 Warnings in Operating Instructions........ 5
1.2.2 Other Symbols ......................... 5
1.3 Target Groups................................. 6
2 Safety Instructions ................................. 7
2.1 Intended Use ................................. 7
2.2 Personnel Qualification......................... 7
2.3 Significance of these Instructions ................ 7
2.4 Proper Working Order of the Device.............. 8
2.5 Symbols on the Device ......................... 8
2.6 Electrical Equipment ........................... 8
2.6.1 Damage to the Electrical Equipment
of the Device .......................... 8
2.6.2 Working on the Device’s Electrical
Equipment............................. 8
2.6.3 AC Adapter and Power Supply Cable....... 8
2.7 Conduct in an Emergency....................... 8
2.8 Accessories, Consumables, and Spare Parts ........ 9
2.9 Personal Protective Equipment .................. 9
2.10 Glass Breakage................................ 9
3 Device Description ................................10
3.1 Device Overview .............................10
3.2 Weighing Pan and Associated Components .......11
3.3 Connections and Components on the Weighing
Module .....................................11
3.4 Connections on the Control Unit................ 12
3.5 Conformity-assessed Devices ...................12
3.6 Symbols on the Device ........................12
4 Operating Concept................................13
4.1 Operating Display in Weighing Mode ............ 13
4.2 Operating Display in the Menu .................14
4.3 Buttons and Keys on the Operating Display.......14
4.4 Displays in the Operating Display ...............15
4.5 Menu Structure ..............................17
4.5.1 Overview of the Device Settings Menu ....17
4.6 Navigating the Menus.........................21
5 Installation.......................................23
5.1 Scope of Delivery.............................23
5.2 Selecting an Installation Site ...................23
5.3 Unpacking the Device .........................24
5.4 Removing the Control Unit ....................24
5.5 Preparing Below-cell Weighing .................25
5.6 Positioning the Weighing Pan and Associated
Components.................................26
5.7 Acclimatization ..............................26
6 Getting Started...................................27
6.1 Connecting Electronic Components .............27
6.2 Installing the AC Adapter ......................27
6.3 Connecting the Power Supply ..................27
7 System Settings...................................28
7.1 Performing System Settings....................28
7.2 Switching Off the isoCAL Function ..............28
7.3 Parameter List ...............................29
7.3.1 Parameters in the “Setup” Main Menu ....29
7.3.2 Parameters in the “Device” Main Menu....31
7.3.3 Parameters in the “Data Output”
Main Menu ........................... 34
7.3.4 Parameters in the “Applications”
Main Menu ........................... 35
7.3.5 Parameters in the “Input” Main Menu.....38
7.3.6 Parameters in the “Language”
Main Menu ........................... 38
7.3.7 Parameters in the “Unit 1”, “Unit 2”,
“Unit 3”, and “Unit 4” Function Menus ....38
8 Operation ........................................39
8.1 Switching the Device On and Off ...............39
8.2 Leveling the Device ...........................39
8.2.1 Leveling the Device with the Level........39
8.2.2 Leveling a Device with Manual Feet with
Inclination Sensor .....................40
8.3 Preparing Weighings..........................40
8.4 Weighing ...................................41
8.5 Overview of Calibration, and Adjustment......... 41
8.6 Adjusting with the isoCAL Function .............41
8.7 Internally Calibrating and Adjusting the Device ...42
8.8 Externally Calibrating and Adjusting the Device
(Not for Conformity-assessed Models) ...........43
8.9 Printing Results ..............................45
8.10 Weighing and Printing with ID Marking..........45
8.11 Running Applications (Examples) ...............46
8.11.1 Executing the “Toggle Between Weight
Units” Function........................46
8.11.2 Running the “Statistics” Application ......46
9 Cleaning and Maintenance.........................48
9.1 Preparing the Device..........................48
9.2 Cleaning the Device ..........................48
9.3 Assembling and Connecting the Device ..........49
9.4 Maintenance Schedule ........................49
9.5 Performing a Software Update .................49
10 Malfunctions .....................................50
10.1 Status Messages..............................50
10.2 Warning Messages............................50
10.3 Troubleshooting..............................52
11 Decommissioning .................................53
11.1 Decommissioning the Device ...................53
12 Transport ........................................53
12.1 Transporting the Device .......................53

Sartorius Cubis MCE Series Specifications

General

Brand	Sartorius
Model	Cubis MCE Series
Category	Scales
Language	English