Cubis
®
MCE Operating Instructions 57
Technical Data
15.2.3 Safety of Electrical Equipment
According to EN 61010-1 / IEC 61010-1 Safety requirements
for electrical equipment for measurement, control, and
laboratory use – Part 1: General Requirements
15.2.4 Electromagnetic Compatibility
Interference resistance
Suitable for use in industrial areas
Transient emissions
Class B
Suitable for use in residential areas and areas that are
connected to a low voltage network that also supplies
residential buildings.
15.3 Materials
Housing: Die-cast aluminum, plastic PBT, Optiwhite float and stainless steel 1.4401 | 1.4404, PA handles,
aluminum trim
Control unit: Plastic PBT, float glass and stainless steel 1.4301
15.4 Integrated Clock
Unit Value
Maximum deviation per month (RTC) s 30
15.5 Backup Battery
Unit Value
Lithium battery, type CR2032
Service life at room temperature, minimum Years 10
To Next Page
Loading...
