Cubis
®
MCE Operating Instructions 55
Disposal
14 Disposal
14.1 Information on Decontamination
The device does not contain any hazardous materials that would necessitate special
disposal actions.
Contaminated samples used during the process are potentially hazardous materials
that could cause biological or chemical hazards.
If the device has come into contact with hazardous substances: Steps must be taken
to ensure proper decontamination and declaration. The operator is responsible for
adhering to local government regulations on the proper declaration of transport and
disposal and the proper disposal of the device.
WARNING
Risk of injury due to contaminated devices!
Devices contaminated with hazardous materials (NBC contamination) will not be
accepted by Sartorius for repair or disposal.
14.2 Dispose of Device and Parts
14.2.1 Information on Disposal
The device and the device accessories must be disposed of properly by disposal
facilities.
A lithium cell battery, type CR2032, is installed inside the device. Batteries must be
disposed of properly by disposal facilities.
The packaging is made of environmentally friendly materials that can be used as
secondary raw materials.
14.2.2 Disposal
Requirements
The device has been decontaminated.
Procedure
t Dispose of the device. Follow the disposal instructions on our website
(www.sartorius.com).
t Inform the disposal facility that there is a lithium cell battery, type CR2032,
installed inside the device.
t Dispose of the packaging in accordance with local government regulations.
To Next Page
Loading...
