Sartorius Entris II BCA Advanced Series - Manual Print Menu; Automatic Print Menu; Parameters in the Settings; Printout; ID Menu

Entris
®
II Advanced Line Operating Instructions 23
Operating Concept
4.11.7 Parameters in the “Settings / Printout / Manual Print” Menu
Parameters Settings Explanation
ISO / GLP
printout
On Activates the ISO / GLP printout.
Off* Deactivates the ISO / GLP printout.
Tare after print On Tares the device automatically after every printout.
Off* Deactivates automatic taring after printout.
Manual print
format
Value* Prints the weight value.
Date, Value Prints the weight value and a time stamp.
Value (N, T,
G#)
Prints a weight value block (net, tare, calculated gross).
Date, Value
(N, T, G#)
Prints a time stamp and a weight value block (net, tare, calculated gross value).
* Factory setting
4.11.8 Parameters in the “Settings / Printout / Automatic Print” Menu
Parameters Settings Explanation
Auto print
interval
Standard Model-specific output rate for weight determination < 1 s.
Interval time* The interval time is used as the output rate.
Interval time Defines the interval time.
Auto print
format
Value* Prints the weight value.
Date, Value Prints the weight value and a time stamp.
* Factory setting
4.11.9 Parameters in the “Settings / Printout / ID” Menu
Parameters Settings Explanation
Set device ID Defines an ID number for the device.
Set additional
ID
Sets an additional ID number for the device.
Batch ID
function
On Activates the output of the batch ID number in the ISO / GLP printout.
Off* Deactivates the output of the batch ID number in the ISO / GLP printout.
Batch ID2
function
On Activates the output of the batch ID2 number in the ISO / GLP printout.
Off* Deactivates the output of the batch ID2 number in the ISO / GLP printout.
* Factory setting