26 Entris
®
II Advanced Line Operating Instructions
Operating Concept
4.11.13 Parameters in the “Settings / Connections / USB” Menu
Parameters Settings Explanation
Used device Indicates which device is connected at the USB port.
Device /
Protocol
SBI Only visible if an FTDI cable is connected. Defines the connected device or the
interface protocol.
xBPI
Printer YDP20
Printer YDP30
Second
display
Barcode
reader
Off
Print to USB
memory
Only visible if a USB storage medium is connected.
Activates or deactivates the print function on the USB storage medium.
USB memory Only visible if a USB storage medium is connected.
Only visible if a printer is connected.
Displays the connected printer.
Activates or deactivates the print function on the connected printer.
RS232
configuration
Configures the connected FTDI cable.
To Next Page
Loading...
Need help?
General