Sartorius Entris II BCA Advanced Series - Unit Toggling Parameters Unit; Accuracy

32 Entris
®
II Advanced Line Operating Instructions
Operating Concept
Parameters Settings Explanation
Optimize Automatic* Activates the automatic reference sample updating. The average piece weight is
recalculated every time the reference sample is updated automatically. The basis
for the calculation is increased every time a new sample is placed. This increases
the counting accuracy of the reference and with it the result.
Off Deactivates automatic reference sample updating.
* Factory setting
Parameters of the “Pipette Test” Application
Parameters Settings Explanation
Print
component
On* Activates the component printout.
Off Deactivates the component printout.
Apply Automatic Automatically saves the weight value.
Manual* Saves the weight value after manual confirmation.
* Factory setting
4.11.19 Unit Toggling Parameters “Unit / Accuracy”
Parameters Settings Explanation
Unit g*, kg, ct, lb,oz,
ozt, tlh, tlt,
GN, dwt, mg, /
lb, tlc, mom,
Kt, tol, bat,
MS, N
Defines the unit of the weight value.
Accuracy All digits on Shows all available decimal places.
Last digit off Does not show the last available decimal place.
* Factory setting