Sartorius Entris II BCA Advanced Series - Page 31

Entris
®
II Advanced Line Operating Instructions 31
Operating Concept
Parameters Settings Explanation
Instability
Sets the intensity of the “Animal activity” to “very active”. Recommended for very
active movements of the sample.
Sets the intensity of the “Animal activity” to “medium”. Recommended for
medium movements of the sample.*
Sets the intensity of the “Animal activity” to “calm”. Recommended for minor
movements of the sample.
Start Automatic Sets the trigger to start the “Animal weighing” application to “automatic”.
Manual* The “Animal weighing” application must be manually selected in the start screen.
* Factory setting
Parameters of the “Checkweighing” Application
Parameters Settings Explanation
Min Defines the lower limit (minimum).
Max Defines the upper limit (maximum).
* Factory setting
Parameters of the “Peak hold” Application
Parameters Settings Explanation
Apply At stability* Peak holds are applied when there is stability.
Without
stability
Peak holds are applied without stability.
* Factory setting
Parameters of the “Counting” Application
Parameters Settings Explanation
Reference Defines the number of reference pieces.
Accuracy Normal*
10-fold
* Factory setting