Entris
®
II Advanced Line Operating Instructions 7
Safety Instructions
1.4.2 Other Symbols
t
Required action: Describes actions that
must be carried out.
y Result: Describes the result of the actions
carried out.
[ ] Text inside brackets refers to control and
display items.
[ ] Text inside brackets indicates status,
warning, and error messages.
Indicates information for legal metrology for
conformity-assessed (verified) devices.
Conformity-assessed devices are also
referred to as “verified” in these instructions.
Figures on the Operating Display
The figures on the operating display of the device may
differ from those in these instructions.
2 Safety Instructions
2.1 Intended Use
The device is a high-resolution balance, which can be
used indoors, e.g. in industrial areas. The device was
developed for the accurate determination of the mass of
materials in liquid, paste, powder, or solid form.
Appropriate containers must be used for loading each
type of material.
The device is exclusively designed for use according to
these instructions. Any further use beyond this is
considered improper.
If the device is used improperly: The device’s protective
systems may be impaired. This can lead to unforeseeable
personal injury or property damage.
Operating Conditions for the Device
Do not use the device in potentially explosive
environments. Only use the device indoors.
The device may only be used with the equipment and
under the operating conditions described in the
Technical Data section of these instructions.
2.1.1 Modifications to the Device
If the device is modified, for example by attaching extra
components: The safety of the device may be impaired
or the device compliance may lose its validity.
If you have any queries regarding modifications to the
device, contact Sartorius.
2.1.2 Device Repairs and Maintenance
Specialist knowledge about the device is required in
order to carry out repair and maintenance work on it. If
the device is not repaired or serviced by a specialist: The
safety of the device may be impaired or the test marks
may lose their validity.
We recommend that any repair work, even that not
covered by the warranty, is carried out by Sartorius
Service or after consulting with Sartorius Service.
Only the maintenance tasks described in these
instructions should be carried out. For maintenance
2.2 Personnel Qualification
If individuals who do not have sufficient knowledge on
the safe handling of the device carry out work on the
device: Those individuals may injure themselves or other
people nearby.
t Ensure that all persons working on the device
possess the necessary knowledge and qualifications
(for description, see Chapter “1.3 Target Groups”,
page 6).
t If a particular qualification is required for the actions
described: These actions must be performed by the
required target group.
t If no qualification is required for the actions
described: Have these actions carried out by the
“user” target group.
To Next Page
Loading...
