Entris
®
II Advanced Line Operating Instructions 33
Operating Concept
4.12 User Management
4.12.1 User Profiles
In the factory, 3 user profiles are defined for the device: Administrator, Supervisor, and Operator. The user profiles are
assigned rights for operating the device. If user profiles are assigned: A user profile must be selected after switching on
the device. Different setting options and functions are displayed in the main menu depending on the user profile.
Setting options / functions Administrator Supervisor Operator
Selecting or changing an application x x -
Carrying out an application, e.g.,
statistics
x x x
Changing settings
Language x x x
Date and time x x (read-only) -
Device info x x x
Cal.-/adj. settings x x (read-only) -
Weighing x x (read-only) -
Printout x x (read-only) -
SBI protocol x x (read-only) -
Connections x x (read-only) -
User settings x x -
User management x x (set user password
only)
x (set user password
only)
More settings x x (read-only) -
Performing leveling x x x
Carrying out calibration and
adjustment
x x x
To Next Page
Loading...
