Sartorius Entris II BCA Advanced Series - Parameters in the Settings; more Settings Menu; Application Parameters

Entris
®
II Advanced Line Operating Instructions 29
Operating Concept
Parameters Settings Explanation
Change user Name Changes the name of the user. The user name must have a max. of 14 characters.
Role Changes the role of the user.
Changes the role of the user.
Delete user Deletes the selected user.
Set user
password
Defines a new password for the logged-in user. The user password must have a
max. of 14 characters.
Set admin
password
Defines the password for the administrator. The admin password must have a
max. of 14 characters.
* Factory setting
4.11.17 Parameters in the “Settings / More Settings” Menu
Parameters Settings Explanation
Next
maintenance
 Sets a date for the next maintenance.
 When the date for the maintenance is reached: Triggers a message.
Reset settings Yes, reset Resets the settings to factory settings.
No* Does not reset the device to factory settings.
Enable service
mode
For service only.
* Factory setting
4.11.18 Application Parameters
Parameters of the “Mixing” and “Components” Applications
Parameters Settings Explanation
Print
component
On* Activates printing of the individual weights of components.
Off Deactivates printing of the individual weights of components.
* Factory setting
Parameters of the “Statistics” Application
Parameters Settings Explanation
Print
component
On* Activates the component printout.
Off Deactivates the component printout.
* Factory setting