Entris
®
II Advanced Line Operating Instructions 13
Operating Concept
4.7 Buttons
Symbol Name Description
[On/Off] button When the button is pressed: Switches the operating display on.
If the button is held down: Switches the operating display to standby mode.
[Zero] button Zeroes the device.
[Tare] button Starts taring.
[Print] button Exports the readouts to the integrated data interfaces.
[Menu] button Opens the main menu.
[isoCAL] button If the button is highlighted orange: Indicates that the device needs to be
calibrated and adjusted.
Starts the isoCAL function.
[Leveling] button Indicates that the device is leveled.
In the main menu: Opens the Leveling Wizard.
[Start leveling]
button
Indicates that the device needs to be leveled.
Starts the Leveling Wizard.
[Ambient
condition] button
Switches between the ambient conditions “v. stable”, “stable”, “unstable”, and
“v. unstable”.
[Application
filter] button
Switches between the “weighing” and “dosing” application filters.
[Toggle between
weight units]
button
Once the weight value is stable: Indicates the set weight unit, e.g., [g] for
“grams”.
When the button is pressed: Opens the settings for toggling between weight
units and for accuracy.
[Invalid weight
value] button
For conformity-assessed models only.
Indicates that the weight value is invalid.
When the button is pressed: Opens a message for rectifying the problem, e.g.,
that the device needs to be leveled.
[Exit GLP] button Exits the GLP printout and starts printing the GLP footer.
[Start GLP]
button
Starts the GLP printout and starts printing the GLP header.
Prints the defined batch and/or sample ID.
[Apply] button Adopts the next component or the next weight value.
[Start] button Starts an application.
[End] button Ends an application.
To Next Page
Loading...
