Section 3: Interface Specifications
Page 3-14
CG4 Series Service Manual
3.4 UNIVERSAL SERIAL BUS (USB) INTERFACE (cont’d)
3.4.3 Host Computer Settings
Installation of USB Standard Print Support
It is necessary to install the USB driver in addition to the printer driver to perform print operation via the USB
port.
As for the USB driver installation procedure, refer to [How to Install the USB Standard Print Support] in the
printer driver installation specifications.
Notes
• OS environment corresponding to the USB interface is [Windows2000/XP/Server2003/Vista], however, the
connection may not be established depending on the manufacturers or models. For more details, refer to
your host computer documentation.
• USB cable length under 1m is recommended.
• Device name of USB port should be "Serial number".
For example: CRGY0032
To Next Page
Loading...
Need help?
General
