SATO CG4 Series - Section 4: Operation and Configuration

Section 4: Operation and Configuration
Page 4-4
CG4 Series Service Manual
4.2 OPERATING MODES (cont’d)
The following flow chart provides a clear summary of each of the modes and its access method.
More operations to be continued on the next page.
Printer Start up
Normal Mode
(Online)
Press POWER
button
Power off
Operation setting
Mode
While pressing
FEED/LINE button,
press POWER button
User Test Print
Mode
Holding
FEED/LINE
button
Factory Test
Print Mode
Holding
FEED/LINE
button
Operating Mode ON LINE (POWER) ERROR
Procedures
LED indicator symbols
: Off
: Red light
: Green light
Off
Off
One short beep
Green light
Green light
Red light
Blinking green light
Blinking red light
Blinking green light
Red light
Printer Start up
Off
Red light
Printer Start up
Off
Off
Off
Off
One
short beep
One
long beep
Two
short beeps
Three
short beeps
Red light
Release POWER button and
keep holding FEED/LINE
button until the desired mode
lighting pattern is shown.
Holding
FEED/LINE
button
LED indicator responses
Buzzer
Boot Download
Mode
With top cover open,
while pressing
FEED/LINE button,
press POWER button
for over 3 seconds