4 Operation and Configuration
135
S84-ex/S86-ex Operator Manual
MEDIA LENGTH
Set the maximum length of the media to be used.
This function affects the printable area (lengthwise) and media size
checking function. It is necessary to set this value based on the actual
media length to be used.
The setting range varies depending on the model as follows:
TRACE MODE
Enable or disable the function to show the printer operation status through
icons in online mode. The following operation status are available:
: Data reception: Shows after receiving any data.
: Data edition: Shows after receiving ESC (1BH) A.
Print: Shows after a print job.
Each icon will be overwritten and cleared when changing to online mode.
SAVE PRINT LOG
Enable or disable to save the printer operation log to a memory card.
• ENABLE: Save the history data to a memory card.
• DISABLE: Do not save the history data to a memory card.
Model Name Setting Range
(mm)
Default
Value (mm)
S84-ex (203 dpi) 0 - 2500 2500
S84-ex (305 dpi) 0 - 1500 1500
S84-ex (609 dpi) 0 - 400 400
S86-ex (203 dpi) 0 - 1249 1249
S86-ex (305 dpi) 0 -1249 1249
To Next Page
Loading...
