SATO s86ex - Page 138

4 Operation and Configuration
136
S84-ex/S86-ex Operator Manual
MEMORY SELECT
Select the storage memory for saving the printer operation log.
SD CARD or USB MEMORY can be selected.
CAUTION
Be sure to perform a virus check for the USB memory or SD card before
connecting it to the printer. SATO Corporation shall not be held responsible
for a malfunction of the printer caused by a virus infection through the USB
memory or SD card.
Note
Shows only if SAVE PRINT LOG is set to ENABLE.
CLEAR PRINT LOG
Select whether or not to clear the history data in the memory card.
• YES: Clear the history data.
• NO: Do not clear the history data.
Note
Shows only if SAVE PRINT LOG is set to ENABLE.
OUTPUT PRINT LOG FROM SUBPORT
Output the printer operation log to the sub port in real time (when the
status has changed).
• ENABLE: Enable the sub port and output the history data from it.
• DISABLE: Disable the sub port and do not output any history data from
it.
Note
Shows only if SAVE PRINT LOG is set to ENABLE.