sauter Equitherm - 14 Technical Data; Overview of Technical Data

EQJW145:
Heating controller
Technical
data
7010015003 A
95
© Fr. Sauter AG
14 Technical data
14.1 Overview of technical data
Power supply: 230 V
Power supply tolerance:
±
15 %, 50…60 Hz
Power consumption: approx. 2 VA
Type of protection: IP40 (when fitted in panels) (EN 60529)
Protection class: II (EN 60730-1)
Permitted ambient temperature: 0…+50°C
Permitted storage temperature: –25°C…+65°C
Permitted ambient humidity: 5…95 % rH (no condensation)
Conformity
EMC immunity
EN 12098 and CE
EN 61000-6-1, 2
EMC irradiation EN 61000-6-3, 4
Safety EN 60730-1
Weight with base approx. 0.4 kg
Dimensions with base (W
×
H
×
D)
146 x 98 x 58
Time-switch:

Running capacity

Accuracy

Switching period for weekly
programme

Number of switching commands,
weekly programme

Switching period for calendar
programme

Number of switching commands,
calendar programme
Min. 24 hours, after supply was connected
for min. 4 hours. parameters, switching
commands are stored permanently
Better than 1sec/day
10 min
6 / day or 42 / week
1 day
20
Inputs:

5 temperature sensors

1 temperature sensor or remote
control unit

1 binary input/ pulse input
Outputs:

relay output for pumps/pilot timer
6 relays
normally open contact, 230V/2A/cos

> 0.5