Scania DC11 - Page 79

01:03-02
©
Scania CV AB 2011, Sweden
79
Fitting
1 Press the new ball bearing into the fan
coupling housing using drift 98 433 and
counterholding tube 98 334.
01_1380
98 433
98 334
2 Fit the retaining ring.
01_1381
3 Press the spindle into the housing.
4 Push the pulley onto the fan coupling
spindle.
01 1382
Fan coupling
www.motodiesel.ir
MASHINESOFT.COM
09120146259