n
Multi-Idler Platform
a) Total platform mounted on load cells:
QPRF = QP
b) Joint Mounting
See Single-Idler Platform
n
Buckled Platform
QPRF = QP
n
Normally, check weight acts on center.
n One-sided mounting of total belt
With inclined belts, consider extension, or shortening,
of calibration lever, if any, in accordance with
single-idler platform.
Chain Calibration Weight:
If a chain curtain is placed over the platform area, the
total weight of chains in weighing area is the effective
check weight.
QPRF=n*Lg*s
N= Number of chains
Lg= Overall belt length in m
s= Chain weight per m in kg/m
3. Conveyor Belt Inclination
In certain cases, the inclination of conveyor belt has to
be entered into parameter. Decisive is the load cell
mounting position.
a) Right-angled to conveyor belt
Enter angle a into parameter. Load cell is loaded
withN=Q*cosa.
b) Vertical to conveyor belt
Enter 0 as angle a. Load cells are loaded with full
force Q.
0837
INTECONT PLUS VBW
Details
BV-H2214 GB 109
Transmission to third parties and reproduction of
this documentation are not permitted.
SchenckProcess GmbH reserves all rights of
ownership and copyrights.
Technische
Redaktion PDE-RD
QPRF QP
LPG
LWZ
=
To Next Page
Loading...