13 Replacement Instructions
Replacing INTECONT PLUS FIP —> INTECONT PLUS VEG
INTECONT PLUS, type “VEG”, is equipped with added functions for INTECONT PLUS, type “FIP”. Logical
inputs/outputs can now be assigned to hardware at will. Please also check all connectors with relevant
parameter assignment.
When using our convenient replacement set (ordering no. V036910.B01), hardware is adapted by plugging.
The EasyServe setting program supplied enables easy assignment and transfer of all software parameters.
0837
INTECONT PLUS VBW
Replacement Instructions
BV-H2214 GB 111
Transmission to third parties and reproduction of
this documentation are not permitted.
SchenckProcess GmbH reserves all rights of
ownership and copyrights.
Technische
Redaktion PDE-RD
FIP base card connection diagram
FIP option card connection diagram
To Next Page
Loading...