Read Parameters
Parameters are defined as variable characteristics or
data used to match INTECONT to the particular
application.
Parameter input is protected by password (see “Enter
Parameters”).
The “Read Parameters” function lets you view all
parameters without jeopardizing the operating
reliability.
The parameters are organized into function blocks A ,
B,... and consecutively numbered within a block.
GTf Scroll Programming function into
display field and acknowledge.
Tf Select Read Parameters
sub-function.
Display shows title of first parameter block.
TU Scroll through parameter blocks
A, B,...
fT Scroll through parameters within a
block.
N Return to blocks.
N Return to normal displays.
For more information, see “Enter Parameters”.
0837
INTECONT PLUS VBW
Control
BV-H2214 GB 17
Transmission to third parties and reproduction of
this documentation are not permitted.
SchenckProcess GmbH reserves all rights of
ownership and copyrights.
Technische
Redaktion PDE-RD
Dialog Behaviour
Block: A
Nominal Feed Rate
B02 1000.0 kg/h
To Next Page
Loading...
Need help?
General
