1 Overview
What Is The INTECONT:
INTECONT PLUS is designed as measuring and
evaluation system for
Belt Weighers
Solids Flow Meters
Mass Flow Meters
Mass Flow Feeders
Weighfeeders
Loss-in-weight Feeders
Three system versions are available:
1. Without option card (standard)
2. With option card VFE 610V for additional
input/outputs and printer
3. With option card for fieldbus
VSS021V : Modbus/S5
VPB 020V: Profibus
VCB020V: DeviceNet
VET020V: MODBUS/TCP
VET022V: ETHERNET/IP
This manual applies to belt weighers using the fully
equipped INTECONT variant.
For Further Reading:
Fieldbus manual BVH2220
SS-RK512 (3964R) FH 458
Modbus (Comp) FH 525
Display:
5x7-dotmatrix with 6 mm character height
Upper display left : running message
right : delivery rate in kg or t
Lower display left : event messages
right : selectable
feed rate, belt speed
etc.
Display can be changed over to American units.
LEDs:
2 green and 3 red LEDs
Green LEDs : Ready
Red LEDs : Error or limit value
messages
Keyboard:
Flexible membranes with tactile touch
gB Start/stop measurement
TU Preselect lower display
Select functions
i Reset counter
G FUNC Call function distributor and
event texts
O DEL Acknowledge event messages
Delete input
0837
INTECONT PLUS VBW
Overview
BV-H2214 GB 1
Transmission to third parties and reproduction of
this documentation are not permitted.
SchenckProcess GmbH reserves all rights of
ownership and copyrights.
Technische
Redaktion PDE-RD
O Z1=1200 0kg
E1 I = 1000kg/h
To Next Page
Loading...