Schenck process Intecont Plus Belt Weigher User Manual

7 Setting Programs
Function Distributor
The function distributor lets you access all setting
programs.
G Call function distributor.
If no event is available, function selected last
is displayed.
f Start function.
N Return to normal displays, or
abort function.
TU
Move through function distributor.
Display Results E
Display Check
START/STOP Feeder Z
Service Values
Batch Number B
Print Counter Readings
>0< Zero Set
START/STOP Keyboard Mode
START/STOP EasyServe
Programming
Calibration Functions S
Read Parameters
Enter Parameters S
Load Default Par. S
Print Parameters
Print Status Report
START/STOP Simulation
Tare S
Weight Check S
Imp/Belt Circuit S
Set Time S
Programming and Calibrating functions lead to further
menus you can move through using cursor keys.
B = If batching mode is selected, additional
functions can be accessed in main distributor.
Abort Batch
Deselect Batch
Batch Number
Print Batch
Make-up
Next = W/Belt Empty
S = Calibrating functions protected by password.
Prompt is output after call of function only
E = An event is available.
Z = Activated via parameter.
Moving through function distributor has no effect on
weighing functions.
0837
INTECONT PLUS VBW
Setting Programs
BV-H2214 GB 33
Transmission to third parties and reproduction of
this documentation are not permitted.
SchenckProcess GmbH reserves all rights of
ownership and copyrights.
Technische
Redaktion PDE-RD
F u n ctions
Displa y Result s

Schenck process Intecont Plus Belt Weigher Specifications

General

Brand	Schenck process
Model	Intecont Plus Belt Weigher
Category	Measuring Instruments
Language	English