A.11
Date Code 20170601 Instruction Manual SEL-387-0, -5, -6 Relay
Firmware and Manual Versions
Instruction Manual
Command Summary
➤ Corrected JMP24A and JMP24B to JMP6A and JMP6B.
Section 10
➤ Added Step 5 in Restricted Earth Fault (REF) Function test.
Appendix A
➤ Changed the name of the appendix to Firmware and Manual Versions.
➤ Revised the firmware versions tables to include the corresponding manual date code for firmware versions.
➤ Added Table A.6, Table A.7, and Table A.8 to replace the Manual Change Information page previously
included in the manual.
Appendix B
➤ Updated to latest version of SEL-300 Series Relays Firmware Upgrade Instructions.
20020118
Appendix A
➤ Updated SEL-387-0-R602 and SEL-387-5-R602 (firmware change corresponds with instruction manual edits
with date code of 20011219).
20011219
Section 1
➤ Changed text related to new firmware changes.
➤ Corrected tightening torque specification for terminal block models.
Section 2
➤ Added a clarifying sentence regarding Frame Ground.
➤ Added voltage 220 in description of optoisolated inputs.
➤ Replaced dimension drawing and front- and rear-panel drawings with updated versions.
Section 3
➤ Deleted figures.
Section 4
➤ Deleted the Relay Word bit table that applied to the SEL-387-0 Relay.
Section 6
➤ Deleted repetitious text.
➤ Corrected some defaults in Settings Sheets Example.
Section 7
➤ Added information about the ID command.
Section 8
➤ Updated figures.
Section 9
➤ Added a description of EVENT T to the Command Summary and in Section 9: Event Reports and SER.
Appendix A
➤ Updated to reflect new firmware version for the SEL-387-0 Relay (R602).
Appendix B
➤ Replaced Appendix B: Firmware Upgrade Instructions with a revised, more comprehensive Appendix B: SEL-
300 Series Relays Firmware Upgrade Instructions.
20010910
Title Page
➤ Deleted the term “Integration Standard” from the title page.
➤ Added SEL-PROFILE to list of SEL copyrighted terms on the reverse of the title page.
Section 1
➤ Added power supply rated 48/125 Vdc or 125 Vac.
➤ Added 220 Vac optoisolated input.
Table A.2 Manual Revision History—SEL-387-0, -5, -6 (Sheet 5 of 7)
Revision Date Summary of Revisions
To Next Page