A.12
SEL-387-0, -5, -6 Relay Instruction Manual Date Code 20170601
Firmware and Manual Versions
Instruction Manual
Section 10
➤ Revised the Factory Assistance paragraph.
Appendix A
➤ Added SEL-387-5 Relay firmware versions R600 and R500.
20010518
Section 1
➤ Made changes to specifications related to new firmware.
➤ Changed minimum temperature rating from 90°C to 105°C under Terminal Connections in General Specifica-
tions.
Section 3
➤ Made changes to text and figures related to new firmware.
➤ Included Restrained Element Operating Current Pickup and Unrestrained Element Current Pickup informa-
tion in the Differential Element subsection.
➤ Included Application Guidelines information for the Overcurrent Element subsection.
Section 4
➤ Made changes to Relay Word bit tables related to new firmware.
Section 6
➤ Made changes to Setting Sheets and Settings Sheets Example related to new firmware.
Section 7
➤ Included notation about the number of events in an SEL-387-0 Relay event report.
Section 8
➤ Included notation about the number of events in an SEL-387-0 Relay event report.
Section 9
➤ Included notation about the number of events in an SEL-387-0 Relay event report.
Section 10
➤ Added a test of harmonic restraint related to new firmware.
Appendix A
➤ Updated to reflect addition of harmonic restraint function to the SEL-387-5 (R408 and R307) and the
SEL-387-6 (R403 and R302).
Appendix D
➤ Changed to document the addition of Vdc to the Fast Meter message.
Appendix E
➤ Changed Compressed ASCII report for the SEL-387-5 Relay to reflect 40 rather than 35 characters in the FID
string.
Appendix G
➤ Made changes to the Binary Input Lookup Table related to new firmware.
➤ Reordered settings in DNP Settings Sheets so they are in the same order as in the relay.
20010330
Reissued Entire Manual as SEL-387-0, -5, -6 Instruction Manual
➤ Merged SEL-387-0 Instruction Manual into the SEL-387-5, -6 Instruction Manual to create the SEL-387-0, -5,
-6 Instruction Manual.
Section 1
➤ Added introductory paragraph about CTs.
➤ Referenced SEL Application Guide 99-07.
➤ Added information about Tightening Torque and Terminal Connections.
➤ Corrected data in AC Current Inputs in General Specifications.
Section 3
➤ Added REF Enable/Block Logic, REF Directional Element, and 51PC1 and 51NC1 Combined Inverse-Time
O/C Elements drawings specific to the SEL-387-0 Relay.
Table A.2 Manual Revision History—SEL-387-0, -5, -6 (Sheet 6 of 7)
Revision Date Summary of Revisions
To Next Page