A.17
Date Code 20170601 Instruction Manual SEL-387-0, -5, -6 Relay
Firmware and Manual Versions
Instruction Manual
Section 4
➤ Corrected an equation.
Section 5
➤ Changed a reference to a figure in Section 2: Installation.
Section 6
➤ Changed references to figures in Section 2: Installation).
Appendix A
➤ Corrected firmware date number.
991029
Appendix A
➤ Updated to reflect new firmware (SEL-387-5, R304).
991008
Section 3
➤ Replaced IRT = 1 with IRT = 4 in discussion of Differential Element Operation.
Section 5
➤ Inserted note about making latch bit settings with care.
➤ Replaced and added text.
➤ Added a figure (Figure 5.19).
➤ Updated Figure 5.20, Figure 5.21, Figure 5.23, and Figure 5.24.
➤ Added CTS to Row 14 of Table 5.8 and Table 5.9.
Section 7
➤ Added discussion of STA C command.
Section 9
➤ Specified acceptable alias setting format and characters for alias names.
Section 10
➤ Replaced label with updated version.
➤ Replaced step 3 under Combined Overcurrent Elements (this affected pagination for the rest of the section).
➤ Added STA C command to Command Summary.
Appendix A
➤ Updated to reflect new firmware (SEL-387-5, R303).
990915
Appendix A
➤ Updated to reflect new firmware (SEL-387-5, R302).
Appendix D
➤ Added A5ED to Binary Message List.
Appendix F
➤ Updated text throughout.
990721
Appendix A
➤ Updated to reflect new firmware (SEL-387-5, R301).
990518
➤ Initial version (SEL-387-5, R300).
Table A.4 Manual Revision History—SEL-387-5, -6 Relay (Sheet 3 of 3)
Revision Date Summary of Revisions
To Next Page
Loading...