Sekonic SPECTROMASTER C-800 - Page 178

166
7. Meter Settings [Setting] Screen
2.
Set the correction value within a range of ±100MK
-1
.
(

P17)
NOTE
When input, the value becomes automatically positive (+) number. If you change
the positive (+) or negative (-) number, touch the [+/-] key.
3.
Touch the [OK] button.
The number is xed, and returns to the Preset Editing screen.
To return to the Preset Editing screen without conrming, touch the [Cancel] button.
The LB index correction value is edited.
LB Index Correction Value Screen
Input number
Preset Editing Screen
[Cancel] Button[OK] Button