176
8. Hardware Setting Screen
Operation
1.
With the meter turned OFF, hold down the Menu Button 6 and
press the Power Button 3.
* Until the Hardware Setting screen is displayed, do not release the Menu Button
6
and
the Power Button
3
.
If you release the button before the Hardware Setting screen is displayed, the
Measuring screen will be displayed.
The Hardware Setting screen is displayed.
2.
Touch the desired menu item.
The setting screen of the selected item will be displayed.
Refer to the explanations on the following page for each item setting.
3.
When nished, touch the [Close] button.
This will return the display to the Measuring screen.
Menu Button
6
&
Power Button
3
To Next Page
Loading...
