Sekonic SPECTROMASTER C-800 - Page 190

178
8. Hardware Setting Screen
2.
Touch the center of the white cross in the upper left corner of the
screen.
The touched position will be shown with a red cross cursor, and the white cross
cursor will move to the next position.
3.
Repeat in 7 places.
Continue and repeat in 7 places.
The screen of "Press the "OK" to determine the touch panel adjustment." will be
displayed.
4.
Touch the [OK] button.
Adjustment of touch panel is completed, and returns to the Hardware Setting
screen.
To return to the Hardware Setting screen without adjusting the setting, touch the [Cancel]
button.
Touch panel adjustment is completed.
[Cancel] Button
[OK] Button
Adjust Touch Panel
Conrmation Screen
Adjust Touch Panel
Screen
The touch position is showed
with a red cross cursor
The white cross move to
the next position