Sekonic SPECTROMASTER C-800 - Page 58

46
4. Basic Operations
NOTE
●
Graph display areas Ra, R1 to R15 are always displayed.
●
Measurements and display will take longer in light levels below 30lx. The
LCD illumination will normally switch off during measurements to avoid
inuence to measurements.
●
Ra is the avaraged value from R1 to R8 only. R9 to R15 are not included in the Ra .
4.
Current measurement appears with the graph in the right side of
display.
5.
Touch the [Memory Selection] icon.
The [CRI Comp. Memory Recall] screen will be displayed.
If no measurements have been memorized, the pop-up screen appears to indicate no
memorized value.
After you conrmed the message "No memorized value.", touch the [Close] button.
Returns to the CRI Comp. screen.
After memorizing several values, select the memorized value again.
[Memory
Selection] Icon
CRI Comp. Memory Recall ScreenCRI Comp. Screen
Memory Selection Pop-up Screen
Memory
Selection
Area
Current Measurement Graph
(Individual CRI Number)