63
4. Basic Operations
NOTE
Measurements and display will take longer in light levels below 30lx. The LCD
illumination will normally switch off during measurements to avoid inuence to
measurements.
4.
Current measurement appears with the spectrum graph.
5.
Touch the [Memory Selection] icon.
The [TLMF
Memory Recall] screen will be displayed.
If no measurements have been memorized, the pop-up screen appears to indicate no
memorized value.
After you conrmed the message "No memorized value.", touch the [Close] button.
Returns to the TLCI/TLMF screen.
After memorizing several values, select the memorized value again.
[Memory
Selection] Icon
TLMF Memory Recall Screen
TLCI/TLMF Screen
Memory Selection Pop-up Screen
Memory
Selection
Area
Current measurement in
graph
To Next Page
Loading...
