Sencore VB2 Series User Manual

If the data do not comply with the threshold values alarms will be generated. The overall alarm settings
further make it possible to enable and disable alarms, thus defining which alarms should be reported in
the Probe alarm list and sent as SNMP traps to an external management system.
Signal
Measurements
Threshold
Settings
Alarm
Settings
SNMP
Alarms
Alarm
Lists
Figure 2.2: Simplified Diagram of the Alarm Handling in the Probe
16 VB2xx GigE User’s Manual version 5.4

Sencore VB2 Series Specifications

General

Brand	Sencore
Model	VB2 Series
Category	Network Hardware
Language	English