Sencore VB2 Series User Manual

6.2.3 Alarms — Flash Alarms (FLASH option)
The FLASH option enables the Flash alarms tab. This alarm list contains the last 20,000 alarms and
keeps them in non-volatile memory so that they survive reboots and power-outages. This opens up a lot
of possibilities for probes that cannot be reached while doing measurements and for probes that need to
be powered down and consulted elsewhere. It also severely increases the size of the alarm list allowing
browsing of older alarms.
62 VB2xx GigE User’s Manual version 5.4

Sencore VB2 Series Specifications

General

Brand	Sencore
Model	VB2 Series
Category	Network Hardware
Language	English