VBC thresholds
Name: The name of the VBC threshold template
No signal: Number of seconds with ‘No signal’
RTP error:
Number of seconds with RTP packet drops. This measurement will be zero
unless the stream is encapsulated in RTP headers
MLR error:
Number of seconds with packet drops in the TS layer (seconds when media
loss rate is non-zero). This is equal to the number of error seconds with CC
errors.
IAT error:
Number of seconds when the inter-packet arrival time exceeds the threshold
Max bitrate error:
Number of seconds the bitrate can exceed the error-threshold before a VBC
alarm is generated
Min bitrate error:
Number of seconds the bitrate can fall below the error-threshold before a
VBC alarm is generated
VB2xx GigE User’s Manual version 5.4 239
To Next Page
Loading...