Sencore VB2 Series - Page 42

Creating a new threshold template is done either by copying an existing one and altering the copy, or by
creating a new threshold template from scratch. The thresholds are defined in these views: ETR 290 —
ETR thresh. , ETR 290 — PID thresh. , ETR 290 — Service thresh. , and possibly COFDM/QAM/VSB/
RF/SAT — COFDM/QAM/VSB/RF/SAT threshold (if a demodulator is present in the chassis).
The thresholds are associated with streams in these views: ASI — Setup , Multicasts — Streams
— Edit and possibly COFDM/QAM/VSB/RF/SAT — Tuning setup (if a demodulator is present in the
chassis).
42 VB2xx GigE User’s Manual version 5.4