SEW-Eurodrive MOVIMOT advanced DRN DBC Series User Manual

11
Technical data and dimension sheets
Technical data
Operating Instructions – MOVIMOT
®
advanced
237
Electronics cover (inverter)
MOVIMOT
®
advanced
Size of the electronics cover Size1 Size 1 (with cooling fins)
Electronics cover (inverter) 0020 0025 0032 0040 0055
Nominal output
current at f
PWM
=4kHz
I
N_inverter
2.0A 2.5A 3.2A 4.0A 5.5A
Apparent output
power
S
N
1.4kVA 1.7kVA 2.2kVA 2.8kVA 3.8kVA
Overload capacity
of I
N_inverter
at F
PWM
= 4kHz
300% f
aus
< 3Hz: 220%
f
aus
> 3Hz: 300%
The overload capacity of the drive unit is limited to 200% M
N
and can
be further limited depending on the gear unit ratio. Set the torque limit
of the inverter accordingly. Refer to the "MOVIMOT
®
advanced Gear-
motos" catalog for the maximum permitted output torques for
MOVIMOT
®
advanced with gear units.
PWM frequency f
PWM
4/8/16kHz (adjustable)
Max. output frequency f
max
U/f: 599Hz
VFC
PLUS
: 250Hz
CFC: 500Hz
ELSM
®
: 500Hz
Nominal power loss
Power section
P
V
19W 24W 31W 40W 58W
Brake chopper and braking resistor
MOVIMOT
®
advanced
Size of the electronics cover Size1 Size 1 with cooling fins
Nominal output current
Electronics cover
2.0A
(0020)
2.5A
(0025)
3.2A
(0032)
4.0A
(0040)
5.5A
(0055)
Minimum braking re-
sistor value
R
BWmin
100Ω
Brake chopper con-
tinuous power
550W 750W 900W 900W 900W
Brake chopper peak
power
300% of the apparent output power S
N
× 0.9 225% S
N
x
0.9
25891936/EN – 05/2020

SEW-Eurodrive MOVIMOT advanced DRN DBC Series Specifications

General

Brand	SEW-Eurodrive
Model	MOVIMOT advanced DRN DBC Series
Category	DC Drives
Language	English