34
Operating Instructions – Electronic Motor DRC.-..-SNI
4
Drive units with optional ASEPTIC / ASEPTICplus design
Mechanical Installation
Example The following figure gives an example of a cable entry with drip loop and the replace-
ment of the plastic screw plugs supplied as standard with suitable stainless steel screw
fittings.
4768361227
[1] The delivered plastic screw plugs must be replaced by suitable screw plugs made of stainless steel.
[2] Required stainless steel screw plugs
(see chapter "Technical data and dimension sheets")
[3] Required stainless steel cable glands
(see chapter "Technical data and dimension sheets")
To Next Page
Loading...
