SICK nanoScan3 I/O

11 Troubleshooting
11.1 Safety
DANGER
H
azard due to lack of effectiveness of the protective device
Persons and parts of the body to be protected may not be recognized in case of non-
observance.
b
Do not do repair work on device components.
b
Do not make changes to or manipulate device components.
b
Apart from the procedures described in this document, the device components
must not be opened.
DANGER
Hazard due to unexpected starting of the machine
b
When any work is taking place, use the protective device to secure the machine or
to ensure that the machine is not switched on unintentionally.
NOTE
A
dditional information on troubleshooting can be found at the responsible SICK sub‐
sidiary.
Further topics
•
"St
atus indicators", page 91
•
"Status indicator with the display", page 92
11.2 Detailed diagnostics using the display
Overview
Use t
he button to call up the menu.
The menu provides access to the following areas:
•
Hardware
•
Configuration
•
Network
•
Data output
•
Service
•
Device restart
Approach
b
Pr
ess and hold to call up the menu.
b
Press the button briefly to switch to the desired menu item.
b
Press and hold the button to confirm the desired menu item.
b
Press the button briefly to navigate through the selected submenu.
b
Press the button repeatedly and briefly to return to the main menu.
b
Do not press the button for some time so that the display returns to the status dis‐
play.
Complementary information
The display language is set using Safety Designer during configuration. The display lan‐
guage and the configuration cannot be changed using the button on the display.
11 T
ROUBLESHOOTING
102
O P E R A T I N G I N S T R U C T I O N S | nanoScan3 I/O 8024596/15VP/2019-11-15 | SICK
Subject to change without notice