SICK nanoScan3 I/O

1 About this document
1.1 Scope
The operating instructions apply to the nanoScan3 safety laser scanner with the follow‐
in
g type label entry in the Operating Instructions field:
•
8024594
This document is included with the following SICK part numbers (this document in all
available language versions):
•
8024594
1.2 Target groups of these operating instructions
Some chapters of these operating instructions are intended for certain target groups.
Ho
wever, the entire operating instructions are relevant for intended use of the product.
Table 1: Target groups and selected chapters of these operating instructions
Target group Chapter of these operating instructions
Project developers (planners, developers,
de
signers)
"Project planning", page 17
"Configuration", page 55
"Technical data", page 111
"Accessories", page 123
Installers "Mounting", page 48
Electricians "Electrical installation", page 50
Safety experts (such as CE authorized repre‐
sent
atives, compliance officers, people who
test and approve the application)
"Project planning", page 17
"Configuration", page 55
"Commissioning", page 89
"Technical data", page 111
"Checklist for initial commissioning and com‐
missioning", page 131
Operators "Operation", page 91
"T
roubleshooting", page 102
Maintenance personnel "Maintenance", page 96
"T
roubleshooting", page 102
1.3 Further information
www.sick.com
T
he following information is available via the Internet:
•
This document in other languages
•
Data sheets and application examples
•
CAD files and dimensional drawings
•
Certificates (such as the EU declaration of conformity)
•
Guide for Safe Machinery. Six steps to a safe machine
•
Safety Designer (software for configuring safety solutions made by SICK AG)
1.4 Symbols and document conventions
The following symbols and conventions are used in this document:
ABOUT THIS DOCUMENT 1
8024596/15VP/2019-11-15 | SICK O P E R A T I N G I N S T R U C T I O N S | nanoScan3 I/O
7
Subject to change without notice