SICK nanoScan3 I/O

Further topics
•
"T
roubleshooting", page 102
8.5 Check during commissioning and modifications
The test is intended to ensure that the hazardous area is monitored by the protective
de
vice and that unprotected access to the hazardous area is prevented.
b
C
arry out the checks according to the instructions from the manufacturer of the
machine and from the operating entity.
8 C
OMMISSIONING
90
O P E R A T I N G I N S T R U C T I O N S | nanoScan3 I/O 8024596/15VP/2019-11-15 | SICK
Subject to change without notice