SICK nanoScan3 I/O

7.17 Report
Figure 48: Report
1
Contents of the report
2
Composition of the report
A report shows a device’s data. You have the option of saving and archiving these data
a
s a PDF.
Report
When you call up the Report dialog box, the Safety Designer creates a report. If after
configuration changes you click on Update, you will receive an updated report.
Settings for reports
You can compile the contents as required.
Complementary information
National and international standards promote or recommend specific data and the per‐
son responsible for it. The required data is included in the report.
7.18 Service
This section describes service options you have with Safety Designer on the safety laser
sc
anner.
CONFIGURATION 7
8024596/15VP/2019-11-15 | SICK O P E R A T I N G I N S T R U C T I O N S | nanoScan3 I/O
85
Subject to change without notice