SICK nanoScan3 I/O

Table 5: Pin assignment of the connecting cable with 8-pin M12 plug connector
Pin Designation Function
1 24 V DC Supply voltage (+24 V DC)
2 OSSD 1.A OSSD pair 1, OSSD A
3 0 V DC Supply voltage (0 V DC)
4 OSSD 1.B OSSD pair 1, OSSD B
5 Uni-I/O 1 Universal I/O 1, configurable:
•
U
niversal input: resetting, EDM (external device moni‐
toring), standby, restarting the device
•
Universal output: contamination, fault, reset required,
monitoring result
6 Uni-I/O 2 Universal I/O 2, configurable:
•
Static control input A1 (together with pin 7)
•
Universal input: resetting, EDM (external device moni‐
toring), standby, restarting the device
•
Universal output: contamination, fault, reset required,
monitoring result
7 Uni-I/O 3 Universal I/O 3, configurable:
•
Static control input A2 (together with pin 6)
•
Universal input: resetting, EDM (external device moni‐
toring), standby, restarting the device
•
Universal output: contamination, fault, reset required,
monitoring result
8 FE Functional earth/shield
Thread FE Functional earth/shield
6.2.2 Connecting cable with M12 plug connector, 17-pin
Voltage supply and local inputs and outputs
•
Male connec
tor
•
M12
•
17-pin
•
A-coded
12
1
23
4
5
6
7
8
9
1
0
11
13
15
14
17
16
Figure 35: Connecting cable (male connector, M12, 17-pin, A-coded)
T
able 6: Pin assignment of the connecting cable with 17-pin M12 plug connector
Pin Designation Function
1 24 V DC Supply voltage (+24 V DC)
2 0 V DC Supply voltage (0 V DC)
3 OSSD 1.A OSSD pair 1, OSSD A
4 OSSD 1.B OSSD pair 1, OSSD B
5 Uni-I/O 1 Universal I/O 1, configurable:
•
S
tatic control input B1
•
Universal input: sleep mode, restarting the device
•
Universal output: contamination, fault, reset required
(OSSD pair 1), monitoring result
ELECTRICAL INSTALLATION 6
8024596/15VP/2019-11-15 | SICK O P E R A T I N G I N S T R U C T I O N S | nanoScan3 I/O
51
Subject to change without notice