SICK TRANSIC111LP - Pressure Suitability; Options and Accessories

103
8014084/ZWT7/V3-1/2020-06 | SICK OPERATING INSTRUCTIONS | TRANSIC111LP
Subject to change without notice
SPECIFICATIONS 10
10.2.6 Pressure suitability
10.3 Options and accessories
For plant design
[1]
[1] Outside the measuring range (e.g., in error case); valid for transmitter, seals, sample gas cell and flange adapter
with M8 screws). Not valid for flange adapter with M5 screws (0.5 bar).
● TSmin: -20 °C
● TSmax: 80 °C
● PS: 10 bar
● V: 0.28 L
● DN: 50 mm
NOTICE:
▸ Do not use the TRANSIC111LP for unstable gases (e.g. acetylene).
▸ Observe local regulations with regard to pressure.
Hydrophobic PTFE filter Hydrophobic PTFE filter, average pore size
8 μm
Cable glands
● Cable gland, M20×1.5 for cable diameter
8…11mm
● Pipe screw fitting ½" NPT (conduit)
User cable connection 8 pin M12 plug
Sample gas cell with wall bracket
Gas connections
Sample gas cell volumes
T90 response time with 1 l/min gas sample flow
rate
Weight
Swagelok connection for Ø 6 mm gas tubes
280 cm
3
11 s
2.2 kg
Test gas connection Swagelok connection for 6 mm tubes