30
8014084/ZWT7/V3-1/2020-06 | SICKOPERATING INSTRUCTIONS | TRANSIC111LP
Subject to change without notice
3 INSTALLATION
3.4.4 Test gas connection (optional)
The optional test gas inlet is specified when ordering.
Fig. 14: Test gas inlet (optional)
1
1 Test gas inlet (optional)
The test gas inlet has a 6 mm Swagelok for tube or hose.
▸ Observe the suitability for:
–Pressure
–Gases
–Temperatures
–Oxygen
The test gas connection has a non-return valve with opening pressure of 1.7 bar (see
“Connections and systems”, page 67).
To Next Page
Loading...
