95
8014084/ZWT7/V3-1/2020-06 | SICK OPERATING INSTRUCTIONS | TRANSIC111LP
Subject to change without notice
SPECIFICATIONS 10
10 Specifications
10.1 Compliances
The technical design of this device complies with the following EU
directives and EN standards:
● Directive 2014/30/EU (Low Voltage Directive, Harmonization of the
laws)
● Directive 2011/65/EU (Restriction of the use of certain hazardous
substances in electrical and electronic equipment – “RoHS”)
● EN 61326-1 (Electrical equipment for measurement, control and laboratory use – EMC
requirements – Part 1: General requirements (IEC 61326-1:2012))
● EN 50581 (Technical documentation for the assessment of electrical and electronic
products with respect to the restriction of hazardous substances)
Electrical protection
● Protection class III: Low voltage protection
● Safety requirements in accordance with DIN EN IEC 61010-1:2011.
● Supply with low voltage protection PELV (in accordance with EN 60204).
A 24V PELV power supply unit is mandatory for supplying the TRANSIC111LP to ensure
electrical safety.
To Next Page
Loading...
