47
8014084/ZWT7/V3-1/2020-06 | SICK OPERATING INSTRUCTIONS | TRANSIC111LP
Subject to change without notice
OPERATION 4
4.7.13 Display/set date (command DATE)
Sets the date.
Syntax: DATE [YYYY] [MM] [DD]<cr>
Example:
4.7.14 Display/set time (command TIME)
Displays the time elapsed since the last device switch-on. The time can be set to the real
time by entering the current time as a parameter. The time switch switches from 23:59:59
to 00:00:00.
Syntax: TIME [hh:mm:ss]<cr>
Examples:
YYYY = Current year
mm = Current month
DD = Current day
>date
YEAR : 2003 ?
MONTH : 7 ?
DAY : 17 ?
>
NOTICE:
The device does not have a real-time clock so that the date set by the user is reset to
0000-01-01 after every switch-on.
The device does not have a real-time clock so that the time set by the user is reset to
00:00:00 after every switch-on.
hh = Hours
mm = Minutes
ss = Seconds
>time
03:28:32
>time 11:23:01
11:23:01
>
To Next Page
Loading...