Establishing the hardware needed
29
Building Technologies 008725_h_en_--
Fire Safety & Security Products 06.2011
10 Establishing the hardware needed
The key system data must be known in order to determine the hardware needed:
1. Define number and type of detector lines
Depending on:
– Detector series
– Number of detectors, input and output modules
– Building structure
2. Define number and type of fire controls
Depending on:
– The fire protection installations to be controlled
– Location of contacts (central or decentralized)
– Contact type of the individual contacts (250 V AC/10 A or 30 V DC/1 A)
3. Define number and type of operating units
Depending on:
– Operating concept
– Language of operating front
– Parallel displays, fire brigade operating units
4. Options
Depending on:
– Printer interface and printer
– PSA/pager interface
– Remote transmission device
– Gateway, etc.
5. Define capacity of emergency power battery
Depending on:
– Total quiescent current
– Emergency power needed for operating period (country-specific)
– Type of remote transmission
6. Define housing type
Depending on:
– Number and type of plug-in modules
– Optional devices needed
– Number and type of sets of batteries
7. Produce configuration sheet(s) (see page 113)
– Select sheets corresponding to configuration
– Complete everything
To Next Page
