About this document
7
Building Technologies 008725_h_en_--
Fire Safety & Security Products 06.2011
1 About this document
Goal and purpose
This document describes how to plan the hardware components of the CS1140
control panel. Safe applications will result from consistently following these instruc-
tions.
Scope of validity
This document contains information about all CS1140 components for ≥EP7F, in-
cluding order numbers.
Target audience
This product documentation and the operating instructions are intended for the fol-
lowing people, who carry out a particular job and have been trained for it.
Group of persons Activity Qualification
Project Manager The Project Manager is responsible for the local
project management. He co-ordinates the sched-
ules of all groups of people working on a project
as well as resources. He also continuously ob-
tains the technical information required for project
realization.
He has had the technical training appropriate to
his function and the size of a project or the prod-
uct line used in the project and has attended the
training courses for project managers at the sup-
plier's works.
Reference documents
Information in Document
825 Characteristics of collective detector lines
1204 Fire alarm signal in explosion-hazardous areas
001260 Description of hardware plug-in modules (CS1140 ’Modular’)
1274 Assembly instructions for housing series H47...
1275 Assembly instructions for housing series H67...
1393 Assembly instructions for housing series H26..../H28...
001508 Guidelines for connection factors, capacity, line resistance etc.
1669 PSA interface board, technical specification
1683 Lightning and surge protection for fire detection installations
1971 Assembly instructions for housing series H37...
004282 FlashTool operating instructions
006516 Designation strip templates for display and operating devices
A6V10062437 NK8000 Installation, Function & Configuration, Commissioning, etc.
008478 Procedure for planning a Sinteso
TM
detector line (FD20)
Operational and safety regulations
Before groups of persons begin work on the system they must have read and understood the related
documents, in particular Chapter 2 "Safety regulations".
To Next Page
Loading...
