LMV Series
Technical Instructions
LV5-1000
Menu Path Parameter Default Range Description
51.1
52.2
52.4
LEGEND - Password Access: (U)=User, (S)=Service, (O)=OEM, Shaded = Commonly Used, ** = Must Set, X = Has Function, / = Partial Function
LMV
natural
GasH
user def
naturalGasH
naturalGasL
propane
butane
This enables the user to pick what type of fuel will be burnt with the O2 Control / O2 Alarm
when firing gas. Options : User defined (see below), naturalgasH (at or above 960 Btu/SCF),
naturalgasL (below 960 Btu/SCF), propane, butane.
x x
oil EL
user def
oil EL
Oil H
This enables the user to pick what type of fuel will be burnt with the O2 Control / O2 Alarm
when firing oil. Options : User defined (see below), Oil EL (Light oil #2), Oil H (Heavy oil #6)
x x
V_LNmin (Gas) (S) 9.9
V_Lnmin (Oil) (S) 11.2
V_afNmin (Gas) (S) 10.93
V_afNmin (Oil) (S) 12.02
V_atrNmin (Gas) (S) 8.89
V_atrNmin (Oil) (S) 10.53
OptgMode COx Gas (S) deact
x
OptgMode COx Oil (S) deact
x
Time COx Alarm (S) 0s 0-600s
x
Params & Display>
O2Contr/Alarm>
COx
deactivated
COx Control
COx Limiter
Future functionality. Does nothing at this time.
9 1-20
x x
x x
x x
x x
x
x
x x
Defines the O2 content of the combustion air. The LMV52 mus
t see this value +/- 2% during
prepurge. This value can be adjusted if O2 enriched air is used.
For user-defined fuels, this
represents the volumetric fuel / air ratio needed for
stoichiometric combustion of the fuel.
For user defined fuels, this represents the quantity of flue gas generated (wet basis) when
either one cubic meter (for gases) or one kg (for oil) of fuel is combusted at stoichiometric
conditions.
For user defined fuels, this represents the quantity of flue gas generated (dry basis) when
either one cubic meter (for gases) or one kg (for oil) of fuel is combusted at stoichiometric
conditions.
A2 (S)
For user defined fuels, these values are adjustable constants for calculating the combustion
efficiency when firing gas or oil.
0-40
0-40
0-40
0.65 0.40-0.80
Type of Fuel (S)
O2 Content Air (O) 20.9% 0-30%
B/1000 (S)
Params & Display>
O2Contr/Alarm>
Gas/Oil Settings>
Fuel user-def
Params & Display>
O2Contr/Alarm>
Gas/Oil Settings
Params & Display>
O2Contr/Alarm>
Gas/Oil Settings
SCC Inc. Page 27 Section 3