<html><head><meta http-equiv="Content-Type" content="text/html; charset="UTF-8"/><title></
title></head>
<body>
<table border="1" cellspacing="0" cellpadding="2" width="100%">
<tr>
<td><a name="20060[0]"><b>20060[0]</b></a></td>
<td colspan="3">AXCONF_GEOAX_NAME_TAB</td>
<center>
<img src="../picture/bitmap3.png">
</center>
<td>-</td>
<td>-</td>
</tr>
<tr>
<td>-</td>
<td colspan="3">Geometry axis name in channel</td>
<td>DWORD</td>
<td>POWER ON</td>
</tr>
<tr>
<td colspan="6">This MD is used to enter the names of the geometry axes
separately for each channel.<br />
<tr>
<td>-</td>
<td colspan="5"> </td>
</tr>
<tr>
<td width="16*">System</td><td width="16*">Dimension</td><td width="16*">Default
value</td>
<td width="16*">Minimum value</td><td width="16*">Maximum value</td>
<td width="16*">Protection</td>
</tr>
<tr>
<td>-</td>
<td>-</td>
<td>60</td>
<td>0</td>
<td>180</td>
<td>7/3</td>
</tr>
</table>
<p></p>
<table border="1" cellspacing="0" cellpadding="2" width="100%">
<tr>
<td><a name="20060[1]"><b>20060[1]</b></a></td>
<td colspan="3">AXCONF_GEOAX_NAME_TAB</td>
<td>-</td>
<td>-</td>
</tr>
<tr>
<td>-</td>
<td colspan="3">Geometry axis name in channel</td><td>BYTE</td>
<td>POWER ON</td>
</tr>
<tr>
Getting Started
2.2 Project example
SINUMERIK Integrate Run MyScreens (BE2)
24 Programming Manual, 12/2017, 6FC5397-1DP40-6BA1
To Next Page
Loading...
Need help?
General
